Filter
Top Products
8-138 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
Also, inquiries are sent to an NTP server at the following times:
z When the command is entered
z When the device is turned on and started
z When the device is restarted by the reload command
(1) Synopsis
• Specifies the interval of inquiries to an NTP server
• Resets the interval of inquiries to an NTP server to the default value
(2) Options
z <interval>
Specifies the interval of inquiries to an NTP server.
Specify the interval in a range of 1 to 24 hours. The default setting is one hour.
z <timeout>
Specifies the timeout time of an inquiry to the server.
Specify a time in a range of 1 to 15 seconds. The default setting is 3 seconds.
(3) Command mode
Global
(4) See also
ntp server
show ntp
(5) Example
• Sets the interval of inquiries to an NTP server
ntp status <interval> <timeout>
no ntp status
Switch(config)# ntp status 12 5
Switch(config)#