Filter
Top Products
C122-E003-02EN 8-153
GSWB
8.3 Operation Commands
enabled exec
(4) See also
None
(5) Examples
• Returns to the [login] prompt after quitting the shell
(6) Error Messages
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
8.3.1.8 telnet
This command is used to communicate with other hosts using the telnet protocol.
(1) Synopsis
(2) Options
z <HOST>
Specifies the IP address of the telnet server. If this parameter is omitted, telnet
subcommand mode is set.
(3) Command Mode
user exec
enabled exec
(4) See also
None
Switch> quit
telnet [<HOST>]