Filter
Top Products
C122-E003-02EN 8-13
GSWB
8.1 Basic CLI Operations
z When "--More--" is displayed, if the [Enter] key is pressed, the screen scrolls up
one line. If the space character is entered, the next screen is displayed. Pressing
the [q] key or [Q] key quits the display. If the [g] key or [G] key is pressed, the last
screen of the contents is displayed.
8.1.6.10 Tab-based complement function
If the [Tab] key is pressed during entry of a command, it adds the string that can be
concatenated with the entered string.
Example: terminal command
Switch# termi<tab>
> Switch# terminal
* The tab-based complement function and function keys can be used on
terminals of the ANSI system, VT100 system, VT200 system, KTERM,
XTERM, CON25, LINUX, or SCREEN type. The show terminal status
command can be used to check the current terminal type.
8.1.6.11 Error messages
If the [Enter] or [?] key is pressed during entry of an operation command and the
string is not recognized, an error message is displayed. The following table lists the
error messages that are common to all of the operation commands.
Table 8.7 Error messages of the operation commands
Error message Error cause Action to be taken
% Unrecognized command An invalid command and "?"
were entered.
Check the entered command.
% Ambiguous command:
"XXX"
XXX: Entered command
An unrecognizable command
abbreviation was entered
(e.g., open c ?).
Check the entered command.
No Memory Insufficient memory Restart the device.
Fatal error A fatal error occurred. Restart the device. Replace
the firmware.