Filter
Top Products
C122-E003-02EN 8-219
GSWB
8.3 Operation Commands
8.3.5 VLAN-related commands
8.3.5.1 show vlan
This command displays parameters of all VLANs defined on the switch or a specific
VLAN (whose VLAN ID or name is specified) defined on the switch. If no port-
channel port has been created, "none" is displayed for the corresponding interface. A
VLAN can be displayed by the show vlan command only when the VLAN has been
created and allocated by the switchport command.
(1) Synopsis
(2) Options
z [id <vlan-id>|name <vlan-name>] (optional)
If you specify id, specify vlan-id next. The range of values that can be specified
for vlan-id is between 1 and 4094.
If you specify name, specify vlan-name next.
If this option is omitted, the command will display all configured VLANs.
(3) Command Mode
user exec
enabled exec
(4) See also
show interface switchport
show vlan [id <vlan-id> | name <vlan-name>]