Filter
Top Products
C122-E003-02EN 8-221
GSWB
8.3 Operation Commands
• If GigabitEthernet 0/1 belongs to VLAN ID 10 (a VLAN name is specified)
Displayed items:
z ID: VLAN ID (created VLAN ID)
VLAN ID 1 is always created by default during initialization of the unit. VLAN ID 1
cannot be deleted.
In the initial state, all interfaces belong to VLAN ID 1, but they can be specified to be
removed from VLAN ID 1. The VLAN IDs range from 1 to 4094.
z Name: VLAN name, and the VLAN name corresponding to a VLAN ID
A VLAN name (up to 32 en-size alphanumeric characters) is specified when a VLAN
is created. [default] is always ID 1.
z Interface: List of interfaces belonging to the corresponding VLAN ID
The displayed interface list does not include any port whose status is invalid, port-
channel port (not created), or TenGigabitEhternet (not mounted).
The following interface types are available:
- GigabitEthernet 0/1-8
- IOU 0 0-7 1
- TenGigabitEthernet 1/1-2
- port-channel 1-7
(6) Error Messages
• vlan id doesn't exist.
Cause: A non-existent VLAN was specified.
Action: Specify an existing VLAN.
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
Switch# show vlan name VLAN0010
ID Name interface
---- ------------------------------------- ------------
0010 VLAN0010 GigabitEthernet 0/1
Switch#