Filter
Top Products
8-132 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
8.2.19 telnet
8.2.19.1 telnet enable
This command enables or disables telnet. A connection cannot be established from a
business LAN by only executing the telnet enable command. Settings must be made
with the remote-access command to allow connections.
Note: Only one connection can be established at a time.
(1) Synopsis
• Enables telnet
• Disables telnet (default)
(2) Options
None
(3) Command mode
Global
(4) See also
remote-access
(5) Examples
• Enables telnet
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
telnet enable
no telnet enable
Switch(config)# telnet enable
Switch(config)#