Filter
Top Products
3-44 C122-E003-02EN
MMB
CHAPTER 3 Web-UI Operations
Table 3.28 Buttons in the [SB#x Status Clear] window
(1) Menu operation
[System] → [SB] → [SB#x] → [Status Clear]
(2) GUI operation
1 Make a selection for component status clearing as follows:
• Click [Clear All Status] to clear the statuses of all components.
• To clear the statuses of components individually, click [Clear Specified
Status] and click [Status Clear] on the component on which you want to clear
the error status.
• Click [Clear Status of common parts] to clear the statuses of common parts.
2 Click the [Apply] button.
The statuses of the specified components are then cleared. Use of these
components is attempted at reboot.
3.2.12 IO_Unit menu
The [IO_Unit] menu consists of the following menus for the respective IO_Units:
z [IOU#0] to [IOU#7]
The menu for IO_Units that have not been mounted are not displayed.
This section describes these menus collectively as [IO_Unit#x] because they share the
same window format and operating methods.
Button Description
Apply To clear the status of a component, select the component, and click
the [Apply] button.
Cancel Click the [Cancel] button to not change information and not clear
the status of a component.