Filter
Top Products
C122-E003-02EN 8-199
GSWB
8.3 Operation Commands
z Member Port: List of member ports
- Master: Master port
Each member port of the port channel inherits the attributes (speed, duplex,
storm-control, and flowcontrol: only flowcontrol for TenGigabitEthernet) of
this port.
- Anchor: Anchor port
Port that is the output destination of unlearned frames, autonomous frames, and
broadcast frames addressed to the port channel
Among member ports that can be used for communication and excluding the
master port, the port with the lowest port number is selected as the anchor port.
If the master port is the only port that can be used for communication, however,
the master port is also the anchor port.
If the anchor port can no longer be used for communication or the member ports
of the port channel are changed, the anchor port is reselected.
(6) Error Messages
• Port-channel ** is not defined.
Cause: An undefined channel group is specified.
Action: Check the channel group definition.
• % Not implement daughter card.
Cause: An unmounted interface is specified.
Action: Check the unit mounting status.
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.