Filter
Top Products
8-294 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
8.3.11 IGMP snooping-related commands
8.3.11.1 show ip igmp snooping
This command displays the IGMP snooping setting.
(1) Synopsis
(2) Options
z [vlan <vlan-id>] (optional): Specify the VLAN ID to be displayed.
If this option is omitted, the command will display all VLANs on the switch.
(3) Command mode
enabled exec
user exec
(4) See also
ip igmp snooping
show ip igmp snooping [vlan <vlan-id>]