Filter
Top Products
C122-E003-02EN 8-95
GSWB
8.2 Configuration Definition Commands
• Input static mac error.
Cause: The specified MAC address is an invalid multicast group.
Action: Check the MAC address.
• igmp vlan is invalid.
Cause: IGMP snooping for the specified VLAN is not enabled.
Action: Reenter the command after enabling IGMP snooping for the specified
VLAN.
• Entry isn't existed.
Cause: The specified entry is not registered.
Action: Check the entered MAC address entry.
• It is necessary to review specified VLAN and port.
Cause: The VLAN and port definitions do not match.
Action: Review the VLAN and port definitions.
• Input parameter error.
Cause: An invalid parameter was specified.
Action: Specify the correct parameter.
• igmp is disable.
Cause: IGMP snooping is disabled.
Action: Enable IGMP snooping, and then reexecute the command.
• mac address table is full.
Cause: The MAC learning table is full.
Action: Wait until the MAC learning table contains free space, and then reexecute the
command.