Filter
Top Products
8-292 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
(6) Error Messages
• Port-channel ** is not defined.
Cause: An undefined channel group is specified.
Action: Check the channel group definition.
• % Not implement daughter card.
Cause: An unmounted interface is specified.
Action: Check the unit mounting status.
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
8.3.10.2 clear ether statistics
This command deletes statistical information about the interface.
(1) Synopsis
(2) Options
z <interface-id> (optional): Specifies the interface.
- IO_Unit 0 0-7 1
- GigabitEthernet 0/1-0/8
- TenGigabitEthernet 1/1-1/2
- FastEthernet 2/1-2/2
clear ether statistics [<interface-id>]]