Filter
Top Products
C122-E003-02EN 4-5
MMB
4.2 Setting Commands
4.2 Setting Commands
The following commands are used to specify information:
z factory_default
z clear access_control
z clear ssh_key
z power off
z power on
z download ssh_key
z set date
z set timezone
z set gateway
z set http
z set http_port
z set https
z set https_port
z set ssh
z set ssh_port
z set telnet
z set telnet_port
z set ip
z set hostname
z set remcs
This section describes how to use these commands.
4.2.1 factory_default
This command resets MMB configuration information to the default values.
Executing the command deletes:
- All account information
- Network configuration information
- Logging information
Therefore, user and network configurations must be set up again after the command is
executed.
z Privilege: Users with the Admin privilege or CE privilege