Filter
Top Products
C122-E003-02EN 4-27
MMB
4.4 Update Commands
4.4 Update Commands
The following commands are used to update firmware:
z update MMB
z update BMC
z update EFI
z update SAL
This section describes how to use these commands.
4.4.1 update MMB
This command downloads an MMB firmware file from the specified URL and
updates MMB firmware.
The input format for the URL is as follows:
http://host/path/file
ftp://host/path/file
A URL cannot be accessed through a proxy server.
Note: The MMB must be rebooted when MMB firmware is updated. To prevent an
interruption in MMB service during an update, Fujitsu recommends updating
the standby MMB first, making it the active MMB, and then updating the
other MMB.
z Privilege: Users with the Admin privilege or CE privilege
(1) Synopsis
(2) Options
0: Updates MMB firmware on MMB#0.
1: Updates MMB firmware on MMB#1.
both: Updates MMB firmware on both MMB#0 and #1.
noverify: Disables the verify check.
quiet: Updates the firmware without interactive operation involving the user.
update MMB [0 | 1 | both] <url> [noverify] {quiet}