Filter
Top Products
C122-E003-02EN 8-59
GSWB
8.2 Configuration Definition Commands
(2) Options
z <seconds>
Specifies the time of the transfer delay timer (s). The setting range is 4 to 30, and the
default value is 15.
(3) Command mode
Global
(4) See also
spanning-tree
(5) Examples
• Sets the transfer time of the spanning tree to 18 s for all instances
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
• Input parameter error.
Cause: An invalid parameter was specified.
Switch(config)# spanning-tree forward-time 18
Switch(config)#