Filter
Top Products
8-142 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
• Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
• Input parameter error.
Cause: An invalid logging level was specified.
Action: Specify the correct logging level.
8.2.22.3 logging host
This command specifies the IP address of the log message (mlog) transfer destination.
The default setting is "0.0.0.0".
If the setting is the default setting, the message log is not transferred to an external
device.
(1) Synopsis
• Specifies the IP address of the log transfer destination
• Resets the IP address of the log transfer destination to the default value (0.0.0.0)
(2) Options
z <ip-address>
Specifies the IP address of the transfer destination syslog server.
(3) Command mode
Global
(4) See also
logging on
show logging
logging host <ip-address>
no logging host