Filter
Top Products
iv C122-E003-02EN
Preface
Syntax of the Command Line Interface (CLI)
The command syntax is described below.
Command syntax
The command syntax is as follows:
z A variable that requires input of a value must be enclosed in < >.
z An optional element must be enclosed in [ ].
z A group of options for an optional keyword must be enclosed in [ ] and delimited
by |.
z A group of options for a mandatory keyword must be enclosed in { } and delimited
by |.
Environmental Requirements for Using This Product
This product is a computer which is intended to be used in a computer room. For
details on the operational environment, see the PRIMEQUEST 480/440 Installation
Planning Manual (C122-H001EN).
Conventions for Alert Messages
This manual uses the following conventions to show alert messages. An alert message
consists of an alert signal and alert statements.
The command syntax is shown in a frame such as this one.
This indicates a hazardous situation could result in serious personal injury if
the user does not perform the procedure correctly.
This indicates a hazardous situation could result in minor or moderate
personal injury if the user does not perform the procedure correctly. This
signal also indicates that damage to the product or other property may occur
if the user does not perform the procedure correctly.
This indicates information that could help the user to use the product more
effectively.