Filter
Top Products
8-32 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• Open error.
Cause: The specified configuration definition file does not exist.
Action: Make sure the configuration definition file exists.
• Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
• Command is already running.
Cause: One of the following commands is running.
clear config / clear ramdisk / restore config / save / save config / tftp
Action: Reexecute after exiting the command.
8.2.1.6 new
This command creates a new configuration definition file and allows you to edit it.
When you finish editing the file, execute the save command to save the configuration
definition file.
The saved configuration will be effective when the device is restarted.
(1) Synopsis
new