Filter
Top Products
C122-E003-02EN 3-79
MMB
3.3 Partition Menu
Table 3.49 Buttons in the [Power Control] window
(1) Menu operation
[Partition] → [Power Control]
Power Control Select a power control setting for each partition.
The [Power On] selection is not displayed for a powered-on
partition. Conversely, the [Power Off], [Power Cycle], [Reset],
and [INIT] selections are not displayed for a powered-off partition.
• Power On: Powers on a partition.
• Power Off: Powers off a partition.
• Power Cycle: Forcibly powers off a partition and powers it on
again.
• Reset: Resets a partition.
• INIT: Generates an INIT interrupt in a partition.
• Force Power Off: Forcibly powers off a partition.
• Not specified: Issues no instruction to a partition.
Force Power Off Delay Specify whether to forcibly power off a partition in the event that
the partition is not powered off by a shutdown instruction issued to
its OS during the power-off sequence or power cycle.
If [Force Power Off] is specified in [Power Control], the delay
time can be specified (range: 1 to 9 minutes). The partition is
powered off when the specified delay time has elapsed.
The default setting is no forcible power-off.
Under Maintenance Indication of whether a partition is under maintenance.
If the partition is under maintenance, "Maintenance" is displayed.
If it is not under maintenance, a hyphen (-) is displayed.
Power control as described on this page is inhibited for any
partition under maintenance.
Button Description
Apply To set the values specified in the power control items of partitions,
click the [Apply] button.
A confirmation dialog box then opens. Click [OK] in the dialog
box to set the values.
Cancel Click the [Cancel] button to revert to the original settings in the
power control items of partitions.
Item Description