Filter
Top Products
C122-E003-02EN 10-19
EFI
10.4 EFI Setup Menu
10.4.3 SCSI Configuration Utility
The SCSI Configuration Utility allows you to change the transfer rate and data width
of the device for each SCSI channel.
Figure 10.14 Example of the displayed [LSI Logic Host Bus Adapters] window
of the SCSI Configuration Utility
* Note on using HyperTerminal
The SCSI Configuration utility assumes that the screen size is 80 x 25, while the
Windows-provided HyperTerminal program assumes that the screen size is fixed at 80
x 24. Therefore, the top and bottom lines of the SCSI Configuration Utility window
are not displayed.
Description of keys
In the SCSI Configuration Utility, you can use the keys listed in the table below, for
example, to select items.
LSI Logic MPT SCSI Setup Utility Version v1.05.00.00
F1/Shift+1 =Help ArrowKeys/H,J,K,L =Select Item -/+ =Change [Item]
Esc=Exit Menu Home(I)/End(O) =Select Item Enter=Execute <Item>
LSI Logic Host Bus Adapters
Adapter PCI PCI PCI RAID FW Revision Pro- LSI RAID IRQ
Bus Dev Fnc Alert duct Control Status
<53C1030 04 02 00> ---- 1.03.11.00 IO Enabled --------- 0