Filter
Top Products
C122-E003-02EN 8-51
GSWB
8.2 Configuration Definition Commands
(4) See also
mac address-table aging-time
show bridge
clear bridge
(5) Examples
• Adds the static address 00:00:00:11:11:11 to the MAC address table
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
• Input bridgemac error.
Cause: An invalid MAC address was specified.
Action: Specify a valid MAC address.
• Input parameter duplicate error.
Cause: Registering an already set MAC address or VLAN was attempted.
Action: Check the entries already registered.
• Set count over.
Cause: Registering more than 128 entries was attempted.
Switch(config)# mac address-table static 00:00:00:11:11:11 vlan 1
forward interface GigabitEthernet 0/1
Switch(config)#