Filter
Top Products
8-202 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
8.3.4.3 ping
This command determines whether communication is possible with the host at the
specified IP address by transmitting ICMP (Echo Request) packets to the specified IP
address and receiving ICMP (Echo Reply) packets.
The ping command does not support transmission to broadcast addresses. This unit
returns the following ICMP messages:
z ICMP Echo Reply message
z ICMP Destination Unreachable (port unreachable) message
(1) Synopsis
• Determines whether communication is possible with the host at the specified IP
address
(2) Options
z <ip-address>
Host IP address used to determine whether communication is possible.
ping <ip-address> {[cyclic [length <length> [count <counter>]]]
|[timeout <seconds>]}