Filter
Top Products
C122-E003-02EN 8-37
GSWB
8.2 Configuration Definition Commands
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
8.2.3 Flow control definition
8.2.3.1 flowcontrol
This command defines flow control. However, no settings can be made for a channel
group.
(1) Synopsis
(2) Options
z {receive | send}
- receive: Specifies whether an interface receives flow control packets from a
remote console.
- send: Specifies whether an interface sends flow control packets to a remote
console.
z {off | on}
-off:
If [receive] is off, the function used by the connected device to send flow
control packets to the interface is turned off.
If [send] is off, the function used by a local port to send flow control packets to
a remote device is turned off.
flowcontrol {receive | send} {off | on}