Filter
Top Products
C122-E003-02EN 5-55
PSA
5.14 Setup Menu
Figure 5.25 [Watchdog] window
Table 5.34 Displayed and settings items in the [Watchdog] window
Item Description
Software Watchdog
Watchdog The user can enable or disable SoftWare Watchdog monitoring:
• Disable: Disable monitoring
• Enable: Enable monitoring
The default setting is [Disable].
TimeOut The user can specify a timeout value in seconds, which is used
while the SoftWare Watchdog monitoring is enabled:
Range: 60 to 6000 seconds
This item can be specified only if [Enable] is selected. The default
setting is 3600 seconds.
Watchdog Action The user can select from a pulldown list the action to be executed
in the event that control is not returned after a timeout:
• No Action: Execute no action. Except SEL output.
• Reset: Reset the partition
• Power Off: Power off the partition forcibly without the normal
OS termination process (shutdown)
• Power Cycle: Forcibly power off the partition and power it on
again
• INIT: Issue an INIT interrupt to the partition
You can only specify this item when you select [Enable]. The
default is [No Action].