Filter
Top Products
8-302 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
8.3.11.5 clear ip igmp snooping statistics
This command clears statistical information on IGMPSnooping.
(1) Synopsis
(2) Options
z vlan <vlan-id> (optional)
Specifies VLAN ID whose IGMPSnooping statistical information is to be cleared.
If this parameter is omitted, IGMPSnooping statistical information on all VLANs
defined on the switch is cleared.
(3) Command mode
enabled exec
user exec
(4) See also
show ip igmp snooping statistics
(5) Examples
• Clears IGMPSnooping statistical information on all VLANs
clear ip igmp snooping statistics [vlan <vlan-id>]
Switch# clear ip igmp snooping statistics
Switch#