Filter
Top Products
C122-E003-02EN 8-87
GSWB
8.2 Configuration Definition Commands
(5) Examples
• Specifies "hash for the destination MAC address" as the load balancing method
of channel group 1
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
8.2.12 IGMP snooping functions
8.2.12.1 ip igmp snooping
This command enables or disables IGMP snooping for the whole device.
If IGMP snooping is disabled for the whole device, IGMP snooping is disabled in all
existing VLAN interfaces.
(1) Synopsis
• Enables IGMP snooping
Switch(config)# interface port-channel 1
Switch(config-if)# port-channel load-balance dst-mac
Switch(config-if)#
ip igmp snooping