Filter
Top Products
8-170 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
(6) Error Messages
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• Command is already running.
Cause: Execution of one of the following commands is in progress:
change, reload, install
Action: Reenter the command after the command currently being executed ends.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
8.3.2.5 show globalmac
This command displays MAC information.
The global MAC address can also be displayed by the show system information
command. (See Section 8.3.2.8, "show system information")
(1) Synopsis
(2) Options
None
(3) Command Mode
user exec
enabled exec
(4) See also
show system information
show globalmac