Filter
Top Products
C122-E003-02EN 2-15
Basics
2.8 Switching to Operations with Software of Another Type
EFI
The EFI is used for special cases such as for changing boot control.
1 Specify an instruction to wait at EFI [Boot Manager Menu] during boot of the
relevant partition, from the [Boot Control] menu of the MMB Web-UI.
2 Start the partition from the MMB Web-UI.
→ The EFI [Boot Manager Menu] window is displayed.
*1 To log in to the MMB via telnet or SSH from an external device, you need to
click [Network Configuration] and [Network Protocols] in that order and set
the necessary parameters to [Enable] in the [Network Protocols] window.
*2 To log in to GSWB#0 or GSWB#1 via telnet or SSH from an external device,
you can use one of two methods below:
- Click [Switch], [GSWB#0], [Management], and [Telnet] in that order and
set the necessary parameters to [Enable] in the [Telnet] window.
- Click [Switch], [GSWB#0], [Management], and [SSH Status] in that
order and set the necessary parameters to [Enable] in the [SSH Status]
window.