Fujitsu 440 Laptop User Manual


 
C122-E003-02EN 3-117
MMB
3.5 Network Configuration Menu
Table 3.85 Buttons in the [Date/Time] window
(1) Menu operation
[Network Configuration] [Date/Time]
(2) GUI operation
1 Specify a date, time zone, etc., and click the [Apply] button.
The specified date, time zone, etc., are then set.
NTP Enable or disable the NTP function.
If [Enable] is specified, the MMB synchronizes the NTP server
time settings on NTP1 to NTP3, which are listed below.
Enable: Enable the NTP function.
Disable: Disable the NTP function.
To use the MMB as an NTP server from another client, [Enable]
must be set for the NTP function.
The default setting is [Disable].
NTP Server1 Specify the IP address of the primary NTP server. (This setting is
valid only if [Enable] is set for the NTP function.)
NTP Server2 Specify the IP address of the secondary NTP server. (This setting
is valid only if [Enable] is set for the NTP function.)
NTP Server3 Specify the IP address of the tertiary NTP server (This setting is
valid only if [Enable] is set for the NTP function. If the setting is
[Disable], this item is grayed out.)
The Latest Sync
Data/Time
Date and time of the latest time synchronization between the
specified NTP server and the MMB
Button Description
Apply Specify a date, time zone, etc., and click the [Apply] button to set
the specified values.
Cancel Click the [Cancel] button to revert to the original settings for the
date, time zone, etc.
Item Description