Filter
Top Products
C122-E003-02EN 8-81
GSWB
8.2 Configuration Definition Commands
(5) Examples
• Maps user priorities 0, 1, and 2 to CoS priority queue 0, user priority 3 to CoS
priority queue 1, user priorities 4 and 5 to CoS priority queue 2, and user
priorities 6 and 7 to CoS priority queue 3
• Maps user priorities 0, 1, 2, and 3 to CoS priority queue 2 and user priorities 4, 5,
6, and 7 to CoS priority queue 3
• Sets the CoS value to the default value
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
• Input parameter error.
Cause: An invalid parameter was specified.
Action: Specify the correct parameter.
Switch(config)# wrr-queue cos-map 0 0 0 1 2 2 3 3
Switch(config)#
Switch(config)# wrr-queue cos-map 2 2 2 2 3 3 3 3
Switch(config)#
Switch(config)# no wrr-queue cos-map
Switch(config)#