Filter
Top Products
3-50 C122-E003-02EN
MMB
CHAPTER 3 Web-UI Operations
Table 3.30 Button in the [IO_Unit#x] window
(1) Menu operation
[System] → [IO_Unit] → [IO_Unit#x]
(2) GUI operation
1 Click the [Status Clear] button.
The error status of the IO_Unit is cleared, and a setting is made so that the
IO_Unit is used again from the next reboot.
DDC#02 to #03 Statuses of DC-to-DC converters 02 and 03
• OK: Operating normally
• Not-present: Not installed
• Configuration error: Configuration error
• Failed: Failure
DDC#04, #07, #08 Statuses of DC-to-DC converters 04, 07, and 08
• OK: Operating normally
• Not-present: Not installed
• Configuration error: Configuration error
• Failed: Failure
SSM Slow-start circuit status:
• OK: Operating normally
• Failed: Failure
Vo l t a g e
Sensor Voltage sensor type
Vo l t a g e Current voltage reading
Threshold Warning
(Low/High)
Lower and upper limits of the warning-level voltage. If no limit is
set, "-" is displayed.
Critical
(Low/High)
Lower and upper limits of the critical-level voltage. If no limit is
set, "-" is displayed.
Button Description
Status Clear Clears the error status of the IO_Unit so that it is used again at the
next reboot.
Item Description