Fujitsu 440 Laptop User Manual


 
3-92 C122-E003-02EN
MMB
CHAPTER 3 Web-UI Operations
Table 3.60 Displayed and setting items in the [Partition Configuration] window
Table 3.61 Buttons in the [Partition Configuration] window
(1) Menu operation
[Partition] [Partition Configuration]
(2) GUI operation
Specifying a partition name
Item Description
# Partition identification number.
Partition Name Name assigned to a partition. A name consisting of up to 16
characters can be entered.
The default name is NULL (empty).
Status Partition status:
OK: Operating normally
Degraded: Component failure (The faulty component can be
isolated to continue operation.)
Failed: Failure
None: The partition is not set up. Specifically, no SB or
IO_Unit is assigned to it.
Power Status Partition power status:
On: Powered on
Standby: Standby mode
SB SBs belonging to a partition.
IO_Unit IO_Units belonging to a partition.
Button Description
Set Partition Name Specify a partition name in a field in [Partition Name], and click
the [Set Partition Name] button to set the specified partition name.
Add SB/IO_Unit Click the [Add SB/IO_Unit] button to display the [Add SB/
IO_Unit] window. SBs and IO_Units can be added to partitions in
this window.
Remove SB/IO_Unit Click the [Remove SB/IO_Unit] button to display the [Remove
SB/IO_Unit] window. SBs and IO_Units can be removed from
partitions in this window.
Home Click the [Home] button to display the [Home] window. An SB or
IO_Unit can be set as the home SB or IO_Unit in a partition in this
window.
Cancel Click the [Cancel] button to revert to the original settings.