Filter
Top Products
C122-E003-02EN 3-149
MMB
3.5 Network Configuration Menu
(1) Menu operation
[Network Configuration] → [Alarm Email]
(2) GUI operation
1 Specify whether alarm e-mail is sent, the e-mail address of the sender, etc.
2 Click the [Filter] button to specify filtering conditions on the events that
require sending of alarm e-mail.
The [Alarm Email Filtering Condition] window is displayed.
3 Specify filtering conditions in the [Alarm Email Filtering Condition] window
(see Section 3.5.11.1, "Alarm Email Filtering Condition window").
4 Click the [Test Email] button to send test alarm e-mail.
Test alarm e-mail is sent to the specified destination.
5 Click the [Apply] button.
The specified values in this window are then set.
Filter Click the [Filter] button to display the [Alarm Email Filtering
Condition] window, which can be used to specify filtering
conditions on the events that require sending of alarm e-mail.
Test Email Click the [Test Email] button to send test alarm e-mail to the
specified destination.
Button Description