Filter
Top Products
7-2 C122-E003-02EN
GSWB
CHAPTER 7 Web-UI Operations
Table 7.1 Functions
Function Command type Description
Log Configuration
definition
Sets the log level (message log only)
Operation Displays/downloads the error log
Displays/downloads the line log
Displays/downloads the message log
Displays/downloads the trap log
Downloads logs in batch
Configuration definition
management
Configuration
definition
Saves a configuration definition file (Running
config)
Operation Restores a configuration definition
Downloads a configuration definition
Uploads a configuration definition
Firmware management Operation Uploads/installs firmware
File selection Operation Used to select a configuration definition at
startup
Used to select firmware for startup
Flow control Configuration
definition
Defines flow control
Jumbo frame Configuration
definition
Configures jumbo frame settings
Rate control Configuration
definition
Defines rate control
Host Configuration
definition
Sets an IP address
Sets the default gateway
Sets a unit name (host name)
MAC bridge Configuration
definition
Sets the aging timer
Adds/deletes a static address (VLAN-ID)
Operation Displays/clears a dynamic address
STP Configuration
definition
Specifies the STP setting (enable/disable)
Sets the bridge priority
Sets the maximum aging time
Sets the Hello time
Sets the transfer delay timer
Sets the port priority
Sets the interface path cost
Defines the BPDU filter
Specifies the STP setting for the specified
interface
Operation Displays the STP status
Clears STP statistical information