Filter
Top Products
8-130 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
(5) Examples
• Sets the base DN for searches
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
• Input parameter error.
Cause: An invalid value was specified for [dn].
Action: Specify a correct value.
8.2.18.3 ldap ssl
This command enables ldap over ssl.
The hash algorithm is always DES.
(1) Synopsis
• Enables ldap over ssl
• Disables ldap over ssl
Switch(config)# ldap dn dc=example,dc=com
Switch(config)#
ldap ssl enable
no ldap ssl enable