Filter
Top Products
C122-E003-02EN 8-119
GSWB
8.2 Configuration Definition Commands
• Specifies that a user be set with the user name "b-sss", authentication level
"priv," password encryption "sha," and read-only privilege
• Uses the show command to check settings
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
• Input parameter error.
Cause: The specified user name, authentication password, or encryption passphrase
is incorrect.
Action: Specify the correct user name, authentication password, and encryption
passphrase.
Switch(config)# snmp-server user b-sss ro priv sha asdfasdf iuytrewq
Switch(config)#
Switch(config)# show snmp-server user
Switch(config)#snmp-server user aaaaa1 ro noauth
Switch(config)#snmp-server user aaaaa2 ro noauth
Switch(config)#snmp-server user aaaaa3 ro noauth
Switch(config)#show snmp-server user
snmp-server user aaaaa1 ro noauth
snmp-server user aaaaa2 ro noauth
snmp-server user aaaaa3 ro noauth
Switch(config)#