Filter
Top Products
6-8 C122-E003-02EN
PSA
CHAPTER 6 CLI Operations
6.3 PSA Start/Stop Command (y30FJSVpsa)
The [y30FJSVpsa] command starts or stops the PSA.
Remarks:
- The execution of this command requires the root or Administrator
privilege.
- Since PSA is a daemon program, it usually is automatically started at
the time of boot.
- When PSA is stopped and restarted, all statuses contained in PSA are
cleared.
Note: If you start PSA during SAF-TE operation command execution, PSA will not
work normally. Start PSA after the command ends its processing.
(1) Synopsis
(2) Options
start | stop
start: Starts PSA.
stop: Stops PSA.
(3) Examples
The following example starts PSA:
The following example stops PSA:
(4) Exit status
0: Normal exit
>0: Abnormal exit
/sbin/service y30FJSVpsa start | stop
# /sbin/service y30FJSVpsa start
# /sbin/service y30FJSVpsa stop