Filter
Top Products
C122-E003-02EN 8-135
GSWB
8.2 Configuration Definition Commands
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
8.2.21 ntp
8.2.21.1 ntp server
This command registers an NTP server and synchronizes the system clock with the
NTP server:
z Three servers can be registered.
z The clock time is acquired from NTP servers in order of registration.
In other words, the order is as follows:
NTP server registered first > NTP server registered second > NTP server registered
third
z NTP authentication is not supported.
z Setting based on received NTP broadcasts is not supported.
z NTP version 4 is used.
z Acquisition processing is not performed for the clock time from any NTP server
registered after the clock time is successfully acquired.
z An inquiry is sent to the NTP server when the command is entered.
z Clock time adjustments may take up to six minutes.
(1) Synopsis
• Registers an NTP server and synchronizes the system clock with the NTP server
• Deletes the specified NTP server from the registered servers
ntp server <ip-address>
no ntp server <ip-address>