Filter
Top Products
C122-E003-02EN 8-181
GSWB
8.3 Operation Commands
8.3.2.11 eeprominit
This command deletes SDR/SEL information.
(1) Synopsis
(2) Options
None
(3) Command mode
enabled exec
(4) See also
None
(5) Examples
(6) Error messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and then restart the unit. Alternatively,
contact a certified service engineer.
eeprominit
Switch# eeprominit
Are you sure? [y/n]: y
Now Perform...
Switch#