Filter
Top Products
8-184 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
z Speed: Setup port speed (Unit: M)
-10
-100
- auto
z Duplex: Setup duplex mode
- half: Half duplex mode
- full: Full duplex mode
- -: Auto port speed
z Capabilities: Combination of the port speed and duplex mode that can be set
-10half
- 10full
- 100half
-100full
- auto
- - (Speed/duplex mode cannot be set)
z Broadcast storm status: Rate control status for a broadcast storm
- Enable / threshold: Threshold packets/second
- Disable
z Multicast storm status: Rate control status for a multicast storm
- Enable / threshold: Threshold packets/second
- Disable
z DLF storm status: Rate control status for a DLF storm
- Enable / threshold: Threshold packets/second
- Disable
z Receive Flow control status: Receive flow control status
z Send Flow control status: Send flow control status
z Link status: Client port status
- up: Interface ready for communication
- down: Interface not ready for communication
z Operation speed-duplex: Actual port speed and duplex mode
If the specified interface type is port-channel, the master port status is displayed.
(6) Error Messages
• Port-channel ** is not defined.
Cause: An undefined channel group is specified.
Action: Check the channel group definition.