Filter
Top Products
8-12 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
* The tab-based complement function and function keys can be used on
terminals of the ANSI system, VT100 system, VT200 system, KTERM,
XTERM, CON25, LINUX, or SCREEN type. The show terminal status
command can be used to check the current terminal type.
8.1.6.8 History function
The command input strings entered from a console (remote console) can be saved and
displayed as history.
The saved history consists of the last commands entered, up to 32 commands. The
maximum length of the command on one line is 1024 characters, including the
linefeed character. History is saved separately for each shell.
Pressing the [Ctrl]+[p] keys from the CLI displays the previous command. Pressing
the [Ctrl]+[n] keys displays the next command. In the former case, if there is no
previous command, the oldest command remains displayed; in the latter case, if there
is no next command, the latest command remains displayed.
8.1.6.9 Pager function
If one screen does not accommodate all contents to be displayed, the contents can be
displayed using successive screens on the terminal.
The terminal pager command can set ON or OFF for the pager function and be used to
check this setting. Initially the pager function is not enabled.
If the pager function is enabled, the displayed contents are as follows:
z A screenful of output information (strings) is displayed.
z If "--More--" is displayed together with the contents of a screen, it indicates a wait
for input from the console.
[Ctrl] + [t] Exchanges the character at the cursor position with
the previous character.
[Ctrl] + [u] Deletes the characters between the beginning of
the line and the cursor position.
[Ctrl] + [w] Deletes the word preceding to the cursor position.
[Ctrl] + [x] Deletes the characters between the beginning of
the line and the cursor position.
[Ctrl] + [y] Inserts input at the cursor position.
Function key Function