Filter
Top Products
C122-E003-02EN 4-13
MMB
4.2 Setting Commands
4.2.15 set ssh_port
This command sets the port number of the port used to accept an SSH session.
The default setting is 22. The setting range is 22,1024 to 65535.
z Privilege: Users with the Admin privilege
(1) Synopsis
(2) Options
None
(3) Examples
None
4.2.16 set telnet
This command enables or disables Telnet.
z Privilege: Users with the Admin privilege
(1) Synopsis
(2) Options
None
(3) Examples
None
4.2.17 set telnet_port
This command sets the port number of the port used to accept a Telnet connection.
The default setting is 23. The setting range is 23,1024 to 65535.
z Privilege: Users with the Admin privilege
set ssh_port <port>
set telnet [enable | disable]