Fujitsu 440 Laptop User Manual


 
8-16 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
Table 8.15 Spanning tree protocol (STP) function
Table 8.16 Virtual LAN (VLAN) function
Table 8.17 Priority control function (Class of Service)
mac address-table static - Y Adds and deletes static
addresses to the MAC address
table.
Command General user Administrator Functional outline
spanning-tree - Y Enables or disables STP for the
whole device.
spanning-tree priority - Y Sets the bridge priority.
spanning-tree max-age - Y Sets the maximum aging time.
spanning-tree hello-time - Y Sets the transmission interval
of Hello messages.
spanning-tree forward-
time
- Y Sets the transfer delay timer.
spanning-tree port-
priority
- Y Sets the port priority.
spanning-tree cost - Y Sets the interface path cost.
spanning-tree bpdufilter - Y Defines the BPDU filter.
spanning-tree - Y Enables or disables the
spanning tree protocol for the
specified interface.
Command General user Administrator Functional outline
vlan - Y Creates and deletes VLANs.
switchport access vlan - Y Specifies an interface for a
VLAN.
switchport mode - Y Sets the selected VLAN
membership mode for an
interface.
switchport allowed vlan - Y Sets trunk properties.
switchport native vlan - Y Specifies a VLAN that
receives traffic without tags.
Command General user Administrator Functional outline
switchport priority
default
- Y Sets the default priority to
frames without tags.
Command General user Administrator Functional outline