Filter
Top Products
3-130 C122-E003-02EN
MMB
CHAPTER 3 Web-UI Operations
3.5.6.3 SNMP v3 Configuration window
An engine ID unique to SNMP v3 as well as user information can be specified in the
[SNMP v3 Configuration] window.
Up to 16 SNMP v3 users can be registered. Registered users are listed in this window.
Note: If the engine ID or IP address is changed, setup for users who have been
registered for SNMP v3 access must be completed again, starting from the
beginning. The SNMP daemon must be restarted to validate registered users.
Therefore, when the [Apply] button in the window is clicked, the SNMP
service stops temporarily.
Figure 3.58 [SNMP v3 Configuration] window
Table 3.98 Displayed and setting items in the [SNMP v3 Configuration]
window
Item Description
Engine ID Specify an engine ID.
User
User Name To register a user, select the check box of the user.
Auth Type Select an authentication type:
• MD5: Uses MD5 as a hash function for password encryption
• SHA: Uses SHA as a hash function for password encryption
authpassphrase Keyword used for packet encryption if password-based
authentication (no encryption) is enabled