Filter
Top Products
C122-E003-02EN 8-85
GSWB
8.2 Configuration Definition Commands
• Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
• port-channel is not define.
Cause: A non-existent channel group was specified.
Action: Reenter the command after creating a channel group.
• Already registered channel-group.
Cause: The interface is already registered with the channel group.
Action: To register the interface to another channel group, delete it from the current
group and register it with the new group.
• Except for master port still remain.
Cause: A port other than the master port is registered with the channel group. The
master port must be the last port deleted.
Action: Delete the port after deleting all the other ports.
• Smaller than master port.
Cause: Registering a port number smaller than that of the master port was attempted.
Action: Specify a port number larger than that of the master port.
• Set count over.
Cause: Registering more than 8 entries was attempted.
Action: Check the entries already registered.
• Port type error.
Cause: The port type is wrong.
Action: Reenter the command after checking the port type.
• Input parameter error.
Cause: An invalid parameter was specified.
Action: Specify the correct parameter.