Filter
Top Products
8-158 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
8.3.1.10 tftp
This command transfers files to or from the tftp server using TFTP.
The default transfer mode is binary transfer mode.
Any 2-byte to 15-byte character string consisting of en-size alphanumeric characters,
including '-' and '_', can be entered for a file name in put/get.
The command cannot be executed during execution of any of the following
commands: clear ramdisk, install, restore config, save config, tftp.
(1) Synopsis
(2) Options
z <HOST>: Specifies the IP address of the tftp server.
If this option is omitted, the command will work as a tftp subcommand without
connection to the server.
(3) Command mode
enabled exec
(4) See also
clear ramdisk
install
restore config
save config
(5) Examples
• Switches to the tftp subcommand
tftp [<HOST>]
Switch# tftp
tftp>