Filter
Top Products
8-58 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
• Input parameter error.
Cause: An invalid parameter was specified.
Action: Specify the correct parameter.
8.2.8.5 spanning-tree forward-time
This command specifies the value of the transfer delay timer.
Note: The transfer delay timer (time) is the time interval required for a transition to
a state, such as the listening state (Listening) > learning state (Learning) >
forwarding state (Forwarding).
(1) Synopsis
• Sets the transfer delay timer
• Resets the transfer delay timer setting to the default value
Switch(config)# spanning-tree hello-time 1
Switch(config)#
spanning-tree forward-time <seconds>
no spanning-tree forward-time