Filter
Top Products
C122-E003-02EN 8-179
GSWB
8.3 Operation Commands
z ERROR
- Config ERROR: An error occurred.
- Hard ERROR: A hardware error occurred.
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
8.3.2.10 clear ramdisk
This command deletes files in the TFTP work area.
The command cannot be executed during execution of any of the following
commands: install, clear ramdisk, restore config, save config, tftp.
(1) Synopsis
(2) Options
None
(3) Command mode
enabled exec
clear ramdisk