Filter
Top Products
8-296 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
8.3.11.2 show ip igmp snooping mrouter
This command displays information about the multicast router interface that has been
dynamically learned or manually set.
(1) Synopsis
(2) Options
z vlan <vlan-id> (optional):
Specifies the VLAN ID whose interface information is to be displayed.
If this parameter is omitted, the interface information on all VLANs defined on the
switch is displayed.
(3) Command mode
enabled exec
user exec
(4) See also
ip igmp snooping
show ip igmp snooping mrouter [vlan <vlan-id>]