Filter
Top Products
C122-E003-02EN 3-121
MMB
3.5 Network Configuration Menu
Table 3.88 Displayed and setting items in the [Management LAN Port
Configuration] window
Table 3.89 Buttons in the [Management LAN Port Configuration] window
(1) Menu operation
[Network Configuration] → [Management LAN Port Configuration]
(2) GUI operation
1 Specify a VLAN mode, and click the [Apply] button.
The specified VLAN mode and speed and duplex mode are then set.
Remarks: When connecting a switching hub to the MMB LAN port, use a
cross cable if you want to set [Speed/Duplex] for the MMB LAN
port to something other than [AUTO].
Item Description
VLAN Mode Specify the VLAN mode of the MMB hub:
• No VLAN mode: Enables communication between the MMB
port and the port of any partition.
• VLAN mode: Blocks communication between partitions.
• Port disable mode: Blocks communication between partitions
and communication between the MMB port and a partition.
The default setting is [No VLAN mode].
Speed/Duplex for MMB#0 to Speed/Duplex for MMB#1
User port Specify the speed and duplex mode:
•Auto
• 100M/Full
• 100M/Half
• 10M/Full
• 10M/Half
The default setting is [Auto].
Maintenance port Same as above
REMCS port Same as above
Button Description
Apply Specify a VLAN mode, speed and duplex mode, etc., and click the
[Apply] button to set the specified values.
Cancel Click the [Cancel] button to revert to the original settings for the
VLAN mode and speed and duplex mode, etc.