Filter
Top Products
8-196 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
Interfaces whose information is displayed:
z IO_Unit 0 0-7 1: Backpanel interface name
z GigabitEthernet 0/1-24: 1000Base-T interface name
z TenGigabitEthernet 1/1-2: 10GBase-LR interface name
z port-channel 1-7: port-channel name
Displayed names:
z speed/duplex/flow: Line speed, duplex mode, and flow control when
communication is ready
- Line speed (bps): 10M/100M/1G/10G
- Duplex mode: FULL (full duplex) or HALF (half duplex)
- Flow control: SEND (transmission), RECV (reception), BOTH (transmission/
reception) or OFF (no control)
z up / down:
- up: Communication ready
- down: Communication not ready
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.